x86 Instruction Set Reference

PADDQ

Add Packed Quadword Integers

Opcode Mnemonic Description
0F D4 /r PADDQ mm1,mm2/m64 Add quadword integer mm2/m64 to mm1.
66 0F D4 /r PADDQ xmm1,xmm2/m128 Add packed quadword integers xmm2/m128 to xmm1.
Description

Adds the first operand (destination operand) to the second operand (source operand) and stores the result in the destination operand. The source operand can be a quadword integer stored in an MMX technology register or a 64-bit memory location, or it can be two packed quadword integers stored in an XMM register or an 128-bit memory location. The destination operand can be a quadword integer stored in an MMX technology register or two packed quadword integers stored in an XMM register. When packed quadword operands are used, an SIMD add is performed. When a quadword result is too large to be represented in 64 bits (overflow), the result is wrapped around and the low 64 bits are written to the destination element (that is, the carry is ignored).

Note that the PADDQ instruction can operate on either unsigned or signed (two's complement notation) integers; however, it does not set bits in the EFLAGS register to indicate overflow and/or a carry. To prevent undetected overflow conditions, software must control the ranges of the values operated on.

Operation
//PADDQ instruction with 64-Bit operands:
if(OperandSize == 64) Destination[0..63] = Destination[0..63] + Source[0..63];
//PADDQ instruction with 128-Bit operands:
else {
	Destination[0..63] = Destination[0..63] + Source[0..63];
	Destination[64..127] = Destination[64..127] + Source[64..127];
}
Flags affected

None.

Protected Mode Exceptions
#GP(0)If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#GP(0)If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0)If a memory operand effective address is outside the SS segment limit.
#UDIf EM in CR0 is set. (128-bit operations only) If OSFXSR in CR4 is 0. (128-bit operations only) If CPUID feature flag SSE2 is 0.
#NMIf TS in CR0 is set.
#MF(64-bit operations only) If there is a pending x87 FPU exception.
#PF(fault-code)If a page fault occurs.
Real-Address Mode Exceptions
#GP(0)(128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.
#GP(0)(128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.
#UDIf EM in CR0 is set. (128-bit operations only) If OSFXSR in CR4 is 0. (128-bit operations only) If CPUID feature flag SSE2 is 0.
#NMIf TS in CR0 is set.
Virtual-8086 Mode Exceptions
Same exceptions as in Real Address Mode
#PF(fault-code)For a page fault.
#PF(fault-code)For a page fault.
Numeric Exceptions
None.
Instruction Latency Throughput Execution Unit
CPUID0F3n/0F2n/069n0F3n/0F2n/069n0F2n
PADDQ mm, mm2/2/21/1/1FP_MISC
PADDQ xmm, xmm6/6/2+12/2/2FP_MISC